SX28-72 Internal Mounted Flange Facer

The SX28-72 Flange Facing machine is normally bore mounted, but is equally at home when surface mounted and being used for refurbishing heat exchanger gasket surfaces.                              The SX28-72 machine covers a range of flanges from 711mm (28") internal diameter to 1829mm (72") external diameter.

Machine Features:

+ Range 28” to 72” (711.2mm to 1828.8mm)

+ Proven durability over many decades

+ Automatic feed

+ Ergonomically designed

+ Quick set-up

PART No. FMG55-599-000192

Add to Quote

The SX28-72 Flange Facing machine is normally bore mounted, but is equally at home when surface mounted and being used for refurbishing heat exchanger gasket surfaces. The SX28-72 machine covers a range of flanges from 711mm (28") internal diameter to 1829mm (72") external diameter.

The turntable incorporates twin 1.7kW (2.3hp) pneumatic motors, which are designed to compensate for the backlash normally found in spur gear drive systems.

The bore mounting base has four sectional legs that ensure precise adjustment while maintaining proper rigidity, even when fully extended. The modular design also makes the SX28-72 easy to set up with any of the optional tube sheet and outside diameter mounting kits, which are available on request.

Facing Range
Minimum Diameter711.2mm280"
Maximum Diameter1828.8mm72"
Clamping Range
Minimum Diameter711.2mm28"
Maximum Diameter1727mm68"
Technical Details
Minimum Diameter1300mm51.1"
Maximum Diameter1880mm74"
Machine Height Above Flange600mm23.6"
Toolpost Travel1300mm51.1"
Recommended Air Supply6Bar @ 1.8m3 /min64cfm @ 87psi
Noise Emission (Sound Power Level)95dB(A)
Feed Rates/Position
10.81mm0.032"
20.25mm0.010"
30.46mm0.018"
40.84mm0.033"
Weights
Machine Weight454kg999lbs
Transportation Weight516kg1135lbs
Transportation Dimensions
LengthWidthHeight
1140mm / 44.9”660mm / 26”830mm 32.7"
Optional Extras
PartPart No:
V-Groove MacKIT01-599-000082
Groove Measuring KitKIT01-599-000075
Tube Sheet Machining KitKIT01-599-000079
Tube Sheet Mounting KitKIT01-599-000076
Lens Ring Machining KitFMG55-599-000445
Slide ArmKIT01-599-000011
Long Reach Toolpost (115mm/4.5”)KIT01-599-000023
Fall Stop KitFMG55-599-002552
2 Years Recommended Spares KitKIT01-599-000004
TEAM ToolkitKIT01-599-000130
TEAM Pneumatic Safety Unit (PSU)KIT01-599-000132

Optional Extras

Kit – 2 Years Recommended Spares Kit SX28-72
kit team toolkit
Kit – SILK Toolkit
Kit – Tube Sheet Machining Kit SX28-72 & AX48-120
pneumatic safety unit with stop switch
Kit – SILK Pneumatic Safety Unit
Kit – Tube Sheet Mounting Kit SX28-72