Kit – V-Groove Machining Kit AX0-24

Suitable for the AX0-24, this V-Groove Machining Kit is designed to be used with the existing D-Section/Toolpost. An initial groove is machined using the D-Section, before replacing with the V-Groove Machining Kit and using the pre-set seat angle of 23º to machine both sides of the groove as required.

The kit consists of a pre-set toolpost located in 2 positions for single-point machining of the grooves as required.

PART No. FMG55-599-000080

Add to Quote

Machining kits are designed to replace the existing D-Section or saddle arrangement in the standard rotary machining centres.

These kits all have the same bolting configuration for easy replacement and set-up.

Standard D-Section covers the range of flat and raised face flanges.

Additional machine kits are used for refurbishing seal faces such as Ring Type Joints (RTJ), Lens Ring and Hub Profile Flanges

Transportation Dimensions
Transportation Dimensions450mm / 17.7"350mm / 13.77"150mm / 5.9"
Mass8 Kg17.6 lbs